Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


...

Image Added

Table of Contents

Overview

This quick start guide covers basic steps from installing sipXcom to placing internal and external calls.  Whether you are installing thousands of phones or just setting up a demo system, sipXcom graphical user interface makes the process straightforward and easy.

...


For large and complex installations, sipXcom provides high reliability, rich functionality, significant reductions in capital expenses (CAPEX) and significant reductions in operating expenses (OPEX). CAPEX is reduced by cost-effective features such as sipXcom running on standard Intel and and AMD servers under open-source Linux and the freedom to competitively purchase hard and soft phonessoftphones, gateways, switches, etc. from many different manufacturers and vendors. OPEX is reduced by the ability to auto-provision phones, centrally administer the system, ease of use and least cost routing.


To get started exploring sipXcom, you can set up an almost free demo sipXcom system. A public cloud installation for demo and testing can be set up for about $20 per month. A domain can be acquired for as little as $1 for one year. SIP trunking can be set up for $1 per month for a DID telephone number and 1c per minute for incoming and outgoing calls in the USA. Softphones such as LINPHONE are open source and free. Other low-cost options are to install sipXcom on open source VirtualBox or an existing CentOS server.

...

  1. Create DNS records for your domainCreate ISO DVD and boot from ISO DVD

  2. Install CentOS 7

    1. Enter network settings

    2. Enter host and domain settings

  3. Update Install sipXcom with maintenance releases

  4. Select Configure server core, telephony, and device services

  5. Add Users

  6. Configure soft and or hard phones

  7. Add SIP Trunking for incoming and outgoing telephone calls

DNS Records for Your Domain

sipXcom requires correct DNS settings to work. And it requires that your PC's (if you want to run softphones) and SIP devices have DNS working properly. It can automatically configure its own DNS server or tell you what the settings need to be. To only test the admin UI, you don't need DNS setup and can use the IP address, but it is still good to at least have the A record for the host set.

...

A DNS Domain that is equivalent to the SIP domain
A-Record (host record) for the server
SRV records for the SIP communications (port 5060 tcp & udp).
SRV record for the resource record (port 5070 tcp)
SRV record for XMPP client connections (port 5222 tcp)
SRV record for XMPP server connections (port 5269 tcp)
SRV record for XMPP client connections to XMPP conference (port 5222)
SRV record for XMPP servers connections to XMPP conference (port 5222)


Please follow the guidance in the link below:
http://wiki.sipxcom.org/display/sipXcom/DNS+Concepts+for+sipXecssipXcom

Obtain, Burn and Boot CentOS 7 Minimal Installation

...

ISO

Download a stable release or development CentOS 7 ISO from here, burn the image on a physical DVD. The ISO contains CentOS Linux operating system and sipXcom and all related compenents.
 

WARNING: The installation will delete ALL data on ALL drives connected to the system. REALLY, IT WILL! It will format the hard drives, create its own partitions and the process will start as soon as you hit Enter. Make sure that you know what you are doing.
 

Insert the DVD into your Intel or AMD server and power it up.

Installation Wizard

  • Press enter on the boot screen to begin sipXcom installation

Image Removed

 

On Configure TCP/IP screen, select Manual Configuration under Enable IPv4 support and then select OK.

Image Removed
On Manual TCP/IP Configuration screen, set the static IPv4 address and subnet mask of the sipXcom server, gateway and name server and click OK.

Image Removed

Select the language, keyboard and time zone to be used during the installation.

Image Removed

Image Removed

Image Removed
Set a root password for sipXcom server.

Image Removed
Click Next on Boot Loader screen.

Image Removed
After CentOS finishes installing, check Next.

Image Removed

Don't forget to take your DVD out of the drive or eject the virtual drive.../CDRom/USB Thumb Drive.

Here's a video to help... Image Added

Initial sipXcom Configuration

Video of initial configuration... Image Added

Network Settings

Login Log in to the system as root with the password you provided earlier and continue to configure sipXcom starting with Network Settings. Enter "n" response to "Would you like to configure your system's network settings?" and continue entering the rest of the items.

Set superadmin password

Using a computer with network connectivity to the newly installed server, launch a Web browser and go to the URL or IP address displayed by the setup wizard (just the hostname of your server).

Note: Some browsers are disallowing self-signed certificates (IE and Chrome).  Try using FireFox and adding in the self-signed certificate as trusted to get by.  Then get a certificate added as soon as possible.  See: Certificates


You may get a certificate warning as seen below (browser dependent... for Chrome click and then click 'Proceed to XXXXXX (unsafe)'):

...

  • The first time you log in Configuration Server Web UI you have to set superadmin's password (enter a strong (hard-to-guess) password that you will not forget)

Log in Configuration Server Web UI

Use superadmin for User ID and password set in the step before for logging in Web UI.


Update DNS external servers

Insert one or more external DNS servers that can resolve external names (System Menu -> DNS).

Update sipXcom with maintenance releases

Logout of the Admin Portal. Then sign in to sipXcom server as root.


At root, enter:

/etc/init.d/sipxecssipXcom stop

after shutdown completes, enter

...

Guidance on upgrading can be found at:
http://wiki.sipxcom.org/display/sipXcom/Upgrade+to+Latest+Stable+Version


Configure Servers – Core Services

Log into Admin Portal. Select all the services checked and Apply. You can mouse over the services for a description of each service.

...

An easy approach is to enable DHCP services and place the phones on a dedicated network segment separate from installed data devices (and other DHCP services).

Image Modified
Anchor
_GoBack
_GoBack


Configure Servers – Telephony Services

Select all the services checked and Apply. You can mouse over the services for a description of each service.


Configuring Servers - Instant Messaging

Select all and Apply.

Configure Servers – Device Provisioning

Select options checked and Apply. You can mouse over the services for a description of each service.


Add Users

Click Users -> Users and then "Add New User"


User ID is automatically inserted but may be changed. At a minimum, check Enabled and enter Last Name, First Name, for user portal Password, and password for Voicemail. SIP password is automatically generated but may be changed. Check Apply and OK.

...

In either case, if a phone is not configured by sipXcom then it does NOT need a phone entry (as in the example of LINPHONE below)

Softphone Configuration

An open source SIP soft phone, softphone, such as Jitsi or LINPHONE for Windows, MAC OSX and Linux can be used.

LINPHONE can be downloaded from:
 http://www.linphone.org/

LINPHONE is also available at no cost for:
Mobile Devices – Android, iOS and Windows 8 from Appstore and Google Play
Web Browsers - Chrome, Internet Explorer, Mozilla Firefox and Safari @ http://web.linphone.org

...



Configure your account and click Apply. Your LINPHONE will register on sipXcom and you are ready to make calls between extensions.
Username: must be a User ID already set up on sipXcom
Password: SIP Password for the above Username from sipXcom Advanced Settings on User Identification screen
Domain: Fully Qualified Domain Name (host plus domain) or use Domain name if you have SIP SRV records in the DNS zone.


Use Dialer to Make Calls

At the bottom of the screen, please see "Registration on sip:sip.nycsip.com successful."

...



Dialer reflects call in progress.

Image Modified


Hard Phone Configuration

  • Navigate to Devices > Phones

ADD New Phone  

sipXcom will automatically configure the many brands and models of hard phones shown in the drop down list shown on the next page. Information on phones can be found in the Wiki at several places including
http://wiki.sipfoundrysipxcom.org/display/sipXcom/What+Phones+to+Choose and
http://wiki.sipfoundry.org/display/sipXcom/Hardphones
 

To automatically configure phones, Server Configuration – Device Provisioning must be set up. Just plug in a supported phone to the VOIP network or VLAN that sipXcom resides on and sipXcom will automatically configure the phone.

Polycom phones will self configure when plugged into the sipXcom system network. The Cisco Discovery Protocol is used. The phone will initially configure with an unique extension ID displayed on the phone such as W9B. The new phone will be listed with the unique ID in the description under Devices, Phones. At this point, you can add lines to this phone, save and send profiles. The phone will re-boot and display the lines added. Please also see
see http://wiki.sipfoundrysipxcom.org/display/sipXcom/Configuring+Polycom+SoundPointSoundpoint+IP+Phones

The alternative to the automatic configuration is manual configuration described next.

You can either go into a user and click Phones and then use the 'Add new phone...' dropdown box, or go into Devices -> Phones and find the same 'Add new phone...' dropdown box.

  • In the Add new Phone drop down select the phone model you are going to use (Polycom SoundPoint IP 550 in this example)

Image Removed

...

  • )

Users -> Select a User -> Phones (left side menu)

Image Added

Devices -> Phones

Image Added



Insert the serial number of the phone which is the MAC address. Also, select the most current firmware version available on sipXcom for this model of phone.
For Polycom phones, please see the firmware matrix for supported firmware at http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html.
For VVX models, please see
http://downloads.polycom.com/voice/voip/uc_sw_releases_matrix.html
These matrices show firmware compatibility for each Polycom phone model.
For Polycom Soundpoint IP 550, the latest firmware supported by Polycom is 4.1.1 but it can run on prior versions.
Check Wiki FAQ for latest guidance. For example, see FAQ for release 4.6 which specifies 4.1.5 split for Polycom VVX 500 and VVX 600 and 3.1.3 for legacy Polycom Soundpoint IP phones.
http://wiki.sipfoundry.org/display/sipXcom/4.6+FAQ

...

Click OK. 

Add New Lines

  • After creating the phone navigate to User Lines tab and Add New Line

...

 
Perform the same steps for the second user - add new phone and assign user 201.

 

Send Profiles

After creating the phones and assigning lines you have to send profiles to phones for the settings to become effective in the phones. In the phone main page select the phones and click Send Profiles button. Monitor status of action in Diagnostics > Job Status page.

...

  • After sending profiles the phones will reboot and you can place a call from extension 200 to 201.

SIP TRUNKING 

SIP Trunking is one way to provide the capability to connect to the Public Switched Telephone Network (PSTN). This will allow you to make a call to someone on the PSTN and to receive calls from others connected to the PSTN. 
 

Setup Gateway Configuration

...

Contact an Interoperable ITSP provider to get account information and ITSP server information from list at:
http://wiki.sipfoundry.org/display/sipXcom/Interoperable+Providers

Select Devices - Gateways - Add New Gateway - SIP Trunk
 

Insert Name of ITSP, use built-in SIP Trunk SBC, use provider template and select from the drop down, and FDQN of ITSP server. Click Apply and OK.

Image Modified

Set up Caller ID

Enter caller id and name. Click Apply and OK.




Select and enable Dial Plan. 

Click on dial plan to be used with gateway.


Enable the dial plan.

 

Select Long Distance dial plan and then Apply and OK. 

Image Modified

Set up ITSP Account

Enter ITSP Username and Authentication Username obtained from ITSP. Usually these are the same. Enter the ITSP password. Enter IPSP FQDN. Click Apply and Enter.
 


...


Incoming Calls

Use aliases on User Identification to forward incoming calls. Insert the 10 digit telephone number for incoming calls provided by the ITSP.

Place a telephone call

You are now ready to Send and Receive Calls from the Public Switch Telephone Network (PSTN).

...