Child pages
  • Changing the SIP Domain Name for Sipxcom in Release 17.04

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Issue Mongo command
  • Issue rs.config() command - you will notice that host name is still pbx.lvtest.com
  • Issue the cfg = rs.config() command - which copies the database parameters into a variable
  • Issue the cfg.members[0].host = "pbx.lvtest1.com" command which changes the voice FQDN host name to pbx.lvtest1.com in Mongo

  • Issue the "rs.reconfig(cfg,{force:true})" command to apply the new pbx.lvtest1.com host name to Mongo

  • Issue the rs.config() command again to ascertain the new host name has been applied in Mongo

  • Issue the exit command from Mongo and then restart the Sipxcom server

...

The phones registered to the Sipxcom voice server currently use lvtest.com as the SIP domain - push all phone profiles which rebuilds the configuration files on the Sipxcom TFTP directory. The phones will need to be manually restarted to pick up the new configuration files and register to the voice server with SIP domain lvtest1.com.

 

Step 7 - Test Incoming, Outgoing Calls, Voicemails, Autoattendants, etc

Test a variety of internal and external calls, call forwards, voicemail, autoattendants to ascertain all calls are working properly. If bearer path fails to appear on some calls (e.g. voicemail announcements), and you are testing with a new voice server, then pay attention to your NAT traversal settings:

  • If this is a new system and Sipxbridge is used,for external calls, ascertain the NAT Traversal type is set to IP address, and Public IP address is set to the IP address assigned to the WAN router, assuming Sipxcom is behind a firewall.
  • If this is a new system and unmanaged gateways are used for external calls, then pay attention to the following settings, particularly if voicemail or autoattendant announcements disappear after 30-60 seconds (assume Sipxcom and gateway is behind a firewall):
    • NAT public IP address should be configured to be the Sipxcom private IP address.
    • The Enable NAT traversal and Server behind NAT settings should be disabled.